GIBSON LES PAUL STUDIO 70s TRIBUTE Aged Relic Silverburst! Mini-HB 20675

Description

You're looking at a 2012 Gibson 70s Les Paul Tribute in a satin Silverburst finish that has been painstakingly reliced. About half real play wear and half man-made relicing, you'll see buckle rash pattern on back, arm wear on the front, extensive checking to finish on front, all hardware worn, and lots of edge wear.

Has dual Dual Blade Alnico mini-humbuckers for vintage tone and retro look. Sports a mahogany body, solid carved maple top, and maple neck with baked maple fretboard. The 12-inch radius neck has what Gibson calls "a unique 70s thin-to-thick profile." It's a bit more chunky than a 60s Slim Taper neck.
 
Nicely worn in and ready to play. I spent a couple hours crowning the frets and rolling the fret ends (see close up pics at bottom). They are near perfect condition. Comes with gigbag. Weight is 8 pounds, 12 ounces. I do a full cleaning and setup on all guitars. (Details on my setups and packing at bottom of listing.) Thanks for looking.

See video demo of similar guitar below!

What You Get
-- Full setup, cleaning, and new strings.
-- FREE USA shipping.
-- 30-day return policy.
-- Ship within 1 business day--pro packing.

Manufacturer Info

The Les Paul Studio '70s Tribute achieves the unique feel of a 1970s Les Paul with a thin-to-thick neck profile that starts out slim at the lower frets and becomes increasingly chunky as you slide toward the cutaway. The Les Paul Studio '70s Tribute looks great with a grain-textured satin nitrocellulose lacquer. The single cutaway body has a mahogany base with maple top. Top is carved and bound in creme binding. Maple neck is equipped with unique `70s contour and a classic mortise & tenon joint. Fingerboard is made of baked maple. Neck has 12" radius and 1.695" wide corian nut.

Body
Top - Maple
Back - Mahogany
Body Type - Traditional Weight Relief

Neck
Species - Maple
Profile - Unique '70s, Thin-To-Thick with Volute
Truss Rod - Traditional Adjustable
Joint Angle - 5 (+/- 15 seconds)

Fingerboard
Species - Baked Maple
Frets - 22
Radius - 12"
Scale Length - 24.75"
Nut/E.O.B - 1.695"/2.260"
Inlays - Figured Acrylic Trapezoid

Headstock
Logo - Gold "Gibson" Logo and Scripted "Les Paul Model" Silkscreen (Silver on Silver Burst)
Truss Rod Cover - Black and White Antique Bell

Pickups
Neck Position - Dual Blade Alnico Mini Humbucker (Alnico II Deluxe)
Bridge Position - Dual Blade Alnico Mini Humbucker (Alnico II Deluxe)

Electronics
Potentiometers - 2 Volume Controls2 Tone Controls
Type - 500k Linear Volume, 500k Non-linear Tone
Coil Wiring - Machine Wound
Toggle Switch - Three-way Switchcraft with Cream Plastic Tip (Black Tip on Cherry and Silver Burst)
Output Jack - Traditional 1/4"

Tuners
Model - TonePros Vintage Style
Tuning Ratio - 16:1
Plating - Chrome

Bridge
Type - Tune-o-matic
Plating - Chrome

Tailpiece
Type - Stop Bar
Plating - Chrome

Guitar Setup
All setups are done by our in-house luthier. Setup includes new strings (9s or 10s depending on what the nut is cut for), overall polish, cleaning any gunk off fingerboard, oiling neck, and polishing frets when necessary. We spray out any pots that are noisy, turn the truss rod (if necessary) and set string height at low-to-medium action depending on string buzz present. Since setup is highly subjective you may need to get it set to your particular needs by your personal luthier. Basses get the same treatment minus the string change. Thanks!

Packing
I use quality boxes, thick bubble wrap, and peanuts to pack guitars. I have a very high rate of successful guitar and bass shipping (meaning few damaged instruments). I have been doing this 10 years and know how to pack well--with or without a hard case. I wrote a detailed story with photos on how I pack a guitar, which you can find on my StillKickinMusic site blog. If you Google "THERE IN ONE PIECE...How to Pack a Guitar" you will find it. Thanks.

Sold Products