HiWatt Hi-5 / T5 1x10 5W Combo Tube Amplifier 2-Ch Amp Celestion G10N-40 00013
Description
This is a Hiwatt Hi-5 portable combo amplifier, a 2-channel amp with clean and overdrive channels. It's an all tube amp that employs one 12ax7 preamp tube and one EL84 power tube and pushes 5 watts through a 10-inch Celestion G10N-40 speaker built into a partially enclosed speaker cabinet. It's in immaculate condition.
The rear panel has outputs for an external speaker cabinet and you can choose to leave its internal speaker engaged or not. It can drive two 8ohm cabs or a single 4ohm external cab. The Gain control lets you dial in breakup even at low volume and a simple Treble/Bass EQ is shared by both channels. Controls include a Standby switch and an Aux Input. This amp would fit the bill for bedroom practice, studio recording, or even small gigs using an external cab. Lightweight and easy to transport. Comes with power cable. Thanks for looking!
This is a Hiwatt Hi-5 portable combo amplifier, a 2-channel amp with clean and overdrive channels. It's an all tube amp that employs one 12ax7 preamp tube and one EL84 power tube and pushes 5 watts through a 10-inch Celestion G10N-40 speaker built into a partially enclosed speaker cabinet. It's in immaculate condition.
The rear panel has outputs for an external speaker cabinet and you can choose to leave its internal speaker engaged or not. It can drive two 8ohm cabs or a single 4ohm external cab. The Gain control lets you dial in breakup even at low volume and a simple Treble/Bass EQ is shared by both channels. Controls include a Standby switch and an Aux Input. This amp would fit the bill for bedroom practice, studio recording, or even small gigs using an external cab. Lightweight and easy to transport. Comes with power cable. Thanks for looking!
What You Get
-- FREE USA shipping.
-- 30-day return policy.
-- Ship within 1 business day--pro packing.
-- FREE USA shipping.
-- 30-day return policy.
-- Ship within 1 business day--pro packing.
Guitar Setup
All setups are done by our in-house luthier. Setup includes new strings (9s or 10s depending on what the nut is cut for), overall polish, cleaning any gunk off fingerboard, oiling neck, and polishing frets when necessary. We spray out any pots that are noisy, turn the truss rod (if necessary) and set string height at low-to-medium action depending on string buzz present. Since setup is highly subjective you may need to get it set to your particular needs by your personal luthier. Basses get the same treatment minus the string change. Thanks!
Packing
I use quality boxes, thick bubble wrap, and peanuts to pack guitars. I have a very high rate of successful guitar and bass shipping (meaning few damaged instruments). I have been doing this 10 years and know how to pack well--with or without a hard case. I wrote a detailed story with photos on how I pack a guitar, which you can find on my StillKickinMusic site blog. If you Google "THERE IN ONE PIECE...How to Pack a Guitar" you will find it. Thanks.
Manufacturer Info
Wattage: 5W Channels: Clean, Gain
Inputs: 1/4" Instrument Input, 3.5mm AUX Input
Outputs: 1/4" Speaker Out (8 Ω, 2 x 1/4" Speaker Out (1 x 4 Ω cabinet or 2 x 8 Ω cabinets)
Preamp Valve: 1 x ECC83 (12AX7)
Output Valve: 1 x EL84
Speaker: 1 x 10" Celestion G10N-40
Speaker Wattage: 40W
Speaker Impedance: 8 Ω
Controls:
Clean Channel Volume
Clean/Overdrive Channel Toggle
Gain
Gain Channel Volume
2-Band EQ shared by both channels — Treble, Bass
Standby — On/Off
Mains — On/Off
Voltage: 120V North American Version
Impedance: 1 Cabinet at 4 Ω, 1-2 Cabinet(s) at 8 Ω (See Outputs)
